Please contact your nearest location to see which vent savers they have in stock
Please contact your nearest location to see which vent savers they have in stock
Please contact your nearest location to see which vent savers they have in stock
Please contact your nearest location to see which vent savers they have in stock
Please contact your nearest location to see which vent savers they have in stock
Please contact your nearest location to see which vent savers they have in stock
Please contact your nearest location to see which vent savers they have in stock
Please contact your nearest location to see which vent savers they have in stock
Adds support and strength to your vent pipes, chimneys, or masts.
The Fin design cuts through and assists in the shedding snow and ice from your roof.
Includes stainless steel nuts, bolts, and heavy-duty 1-1/2″ lag screws.
Fits any roof pitch and pipe sizes from 1″ to 14″ in diameter.
*Not to be installed on roofs subjected to the impact of snow or ice dropping from unprotected upper roof areas.
Please contact your nearest location to see which vent savers they have in stock
“An Exceptional Synthetic Underlayment Designed to Replace Asphalt Saturated Felts”
SecureGrip 30 Synthetic Roof Underlayment is a synthetic roof-deck protection designed and manufactured to replace asphalt saturated felt in sloped roof system construction.
A cost effective roofing underlayment used beneath fiberglass and asphalt shingles, shakes, stone coated steel roofing shingles, synthetic slate or sloped installations of standing seam metal panels.
Always store rolls upright on pallets (or in the cradled pallet they are shipped on) and in a dry protected area.
SecureGrip 30 Synthetic Underlayments are available throughout the United States. Check with your local representative for product availability.
| Standard | SecureGrip 30 | |
|---|---|---|
| Mech Attached Polymer UDL | ASTM D8257 | pass |
| Permeability | ASTM E96 | 0.06 perms |
| Water Transmission | ASTM P4869 | pass |
| Nail Sealability | ASTM D1970 | pass |
| Pliability | ASTM D226 | pass |
| Tear Strength | ASTM D4533 | MD 25 lbs / CD 25 lbs |
| Tensile Strength | ASTM D751 | MD 109 lbs / CD 87 lbs |
| Elongation | ASTM D751 | MD 20% / CD 20% |
| Wt Per Square | ASTM D5261 | 2.1 lbs |
| Nominal Thickness | ASTM D5261 | 7 mls |
| Range of Temperature | -40°F to 240°F | |
| Fire Rating UL Class A | ASTM E108 | pass |
| Per Roll | 48"X250' | Rolls Per Pallet | 56 rolls |
|---|---|---|---|
| Material Per Roll | 1000 sq. ft. | Wt Per Pallet | 1,300 lbs |
| Squares Per Roll | 10 squares | Wt Per 100 sq. ft. | 2.1 lbs |
| Weight Per Roll | 23 lbs | Limited Warranty | 30 years |
Performance characteristics meet or exceed ASTM D4869 – Type I, II, III and IV
Performance characteristics meet or exceed ASTM D226 – Type I, II
Tested in accordance with ICC-AC-207- UV Exposure – 90 days
U.L. Classified as a Prepared Roofing Accessory
Meets the requirements of ICC-AC-188 – Intertek / WH #CCRR 1045
FBC Approved – #FL18374
TDI Listed – CCRR #1045
Miami-Dade County approved
